|
To measure your toe or finger for the proper size simply place a string
around your toe or finger as shown in Fig. 1. Allow enough room for
comfort and any normal swelling, On a toe the measured size should not
allow the string to come over the end of the toe. Generally, if a ring
can go over the end of your toe without lubricating it, the ring would
be too loose.
Rings
that are to be worn on the knuckle must fit somewhat tight also so that
the rings are held securely in place.
After
you are satisfied with the fit, mark the strings where they cross
as shown in Fig. 2. Using the printed Sizing
Form, place the string as shown in Fig. 3, with one mark on the
zero and the other mark on the sizing numbers and read the size. Wherever
the second mark falls is the ring size. If it falls between two numbers
this would be a half size, i.e. 3 1/2, or 4 1/2.
|
Click
here to download our Sizing Form.
You
will need Adobe Acrobat Reader
*Please
note, when printing your Ring Sizer, be sure to select the "PRINT
AS IMAGE"
option from your printer's dialog box when printing. This will ensure
the sizer to be exactly to scale.
|
